Loctite 42540 425 Assure Threadlocker Surface Curing, Blue, 20 Gram Bottle

#ad
Loctite #ad - Temperature range: -65¡ã to +180¡ãf. Can be post-applied and is recommended for nylon, polyester, and other plastic surfaces. Viscosity: 80 cp. Store refrigerated for maximum shelf life. P>color: blue container type: bottle container volume: 20 g cure time: 24 hrs dry time: 1. 5 min odor: sharp, irritating sealant material: cyanoacrylate Temperature Range: -65¡ã To 180¡ãF Typical Use: For Small Metal And Plastic Fasteners And Temper-Proofing.

#ad



Loctite 22221 Purple 222MS Low Strength Thread Locker, 10 mL Bottle

#ad
Loctite 22221 #ad - Controlled lubricity for accurate clamp loads. Ideal for fastener diameters of 1/4" and smaller. Parts can be separated using hand tools. Parts can be separated using hand tools. Loctiter 222mstm thread locker is ideal for fastener diameters of 1/4" 6mm and smaller. Controlled lubricity for accurate clamp loads.

#ad



Henkel Loctite 242 Nut & Bolt Threadlocker, 50mL

#ad
Henkel Asia Paciffic & China Headquarters #ad - To prevent hardening, the anaerobic adhesive should be in contact with air. Ideal for fastener diameters of 1/4" and smaller. Tolerant of oil and other contamination. Shake the product thoroughly before use. Temp range -65 to 300 degrees F. Parts can be disassembled with hand tools. Protects threads from rust and corrosion.

A large 120ml container was filled with 50ml of contents. For blind holes: apply several drops of the product down the internal threads to the bottom of the hole. In rare instances where hand tools do not work because of excessive engagement length, apply localized heat to nut or bolt to approximately 482°F 250°C.

Henkel Loctite 242 Nut & Bolt Threadlocker, 50mL #ad - Cleanup clean adhesive residue immediately with a damp cloth. For disassembly, shear with standard hand tools and remove with methylene chloride. Sets in approximately 10 minutes and fully cures in 24 hours. Disassemble while hot. Assemble parts and tighten as required. Note: to prevent the product from clogging in the nozzle, avoid touching the bottle tip to the metal surface.

There is only half of the bottle, but the contents are 50ml. Controlled lubricity for accurate clamp loads.

#ad



Loctite 495 Super Bonder 442-49550 1oz Instant Adhesive, Clear Color

#ad
Loctite HL49550 #ad - Ideal for fastener diameters of 1/4" and smaller. Parts can be separated using hand tools. Cure speed 15 min. Protects threads from rust and corrosion. Controlled lubricity for accurate clamp loads. Ideal for multi-purpose. Applicable materials are plastic, most metals, rubber. 0004" gap fill. Prevents loosening from shock and vibration.

Loctite 495 Super Bonder 442-49550 1oz Instant Adhesive, Clear Color #ad - No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone. Can be used on various sizes of fasteners - reduces inventory costs. Permanently locks studs and press fits. Medium strength thread locker for fasteners up to 3/4". Cyanoacrylate chemical compound. 45. 0 cp viscosity. Testing and approvals are Commercial item Standard A-A-3097, American Bureau of Shipping.

Full 24 hrs. Designed to bond rubber, metal and plastic parts with gaps to 0004". Fix cure time 20 seconds and full cure time 24 hour at the temperature of 77 degrees fahrenheit.

#ad



Vibra-TITE VC-3 Threadmate, 30 ml Bottle with Brush Cap Applicator

#ad
ND Industries 213 #ad - Locks and seals threaded fasteners of virtually any size. Prevents fastener loosening due to shock and vibration. Tolerant of oil and other contamination. Ideal for fastener diameters of 1/4" and smaller. Cures reliably even on stainless steel. Parts can be disassembled with hand tools. Cure speed 15 min. From tiny eyeglass screws to huge construction bolts, ideal for use on fasteners of any size.

Controlled lubricity for accurate clamp loads. Excellent shelf life: parts coated with Vibra-TITE VC-3 Original can be stored indefinitely before use. Prevents loosening from shock and vibration. No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone. Can be used on various sizes of fasteners - reduces inventory costs.

Vibra-TITE VC-3 Threadmate, 30 ml Bottle with Brush Cap Applicator #ad - Permanently locks studs and press fits. Medium strength thread locker for fasteners up to 3/4". Designed for use on external and internal threads of virtually any material or finish, Vibra-TITE VC-3 Original dries to the touch within seconds of application coated parts are ready for assembly in just a few minutes.

Protects threads from rust and corrosion. Works with metal, wood, PE and PP plastic, and more.

#ad



Loctite Super Glue Plastics Bonding System with Activator 2-Gram 681925

#ad
Loctite 681925 #ad - When mixed in equal volumes, rigid, the components react to produce a tough, high strength bond in 20 to 25 minutes. Loctite epoxy plastic bonder does not shrink and is resistant to water, most common solvents and shop fluids. It has high impact resistance and can be sanded and drilled. Recommended for bonding substrates such as PVC, acrylic, Mylar, FRP, ABS, Delrin, Nylon, phenolic, polycarbonate, aluminum and stainless steel.

2 grams. Easy to apply - no mixing. Dimensions: overall Height - Top to Bottom: -3. 81 inches. Use for repairing figurines, toys, wiper blades, costume jewelry, cameras, metal car parts, rubber seals and O-rings. Bonds leather, metal, cardboard, chipboard, rubber and hard plastics such as Plexiglas, wood, paper, ceramic, cork, polycarbonate, fabric, polystyrene and PVC.

Loctite Super Glue Plastics Bonding System with Activator 2-Gram 681925 #ad - Sets in seconds and dries transparent. 681925 features: -Repairs any plastic guaranteed. Temp range -65 to 300 degrees F. Prevents loosening from shock and vibration. No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone. Can be used on various sizes of fasteners - reduces inventory costs.

#ad



SMA Male to Female Right Angle 90-Degree Adapter Gold Plated Contacts Pack of 2

#ad
onelinkmore OL0444-X #ad - Sma male with a pin in center to SMA Female with A hole in center. Locks and seals threaded fasteners of virtually any size. Prevents loosening from shock and vibration. No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone. Can be used on various sizes of fasteners - reduces inventory costs.

Permanently locks studs and press fits. Medium strength thread locker for fasteners up to 3/4". Product series:type sma is one kinf of rf coaxial connectors that is widely applied, eg: connection for two-way radio, characteristic impedance is 50 Ω, high reliability and long life, video, audio, has a wide range of application, excellent performance, This SMA series is small threaded coaxial connectors with high frequency bandwidth, with small-sized thread coupling, and other test equipment.

SMA Male to Female Right Angle 90-Degree Adapter Gold Plated Contacts Pack of 2 #ad - Product specification:temp range:-65~+165℃ pe cable-40~+85℃vibration:MIL-STD-202, Method 213Impedance:50ΩFrequency Range:DC~12. 4ghzworking voltage:335v maxinsulation resistance≥ 5000 MΩInsertion loss≤015 db/6ghzsma coaxial adapter body plating:goldplated connector material:Brass Gender:SMA Plug, male pin/SMA Jack, female pin Style:Right Angle Mounting Type:Free hanging Ideal for fastener diameters of 1/4" and smaller.

Full 24 hrs. Designed to bond rubber, metal and plastic parts with gaps to 0004".

#ad



Swan 16 Ounce 99 Percent Pack of 4 - Swan Isopropyl Alcohol 99 Percent

#ad
Unknown #ad - Prevents fastener loosening due to shock and vibration. Easy to apply - no mixing. Protects threads from rust and corrosion. Swan isopropyl alcohol 99 percent - swan 16 Ounce 99 Percent Pack of 4 Ideal for fastener diameters of 1/4" and smaller. The connector housing and pin in center are made of pure brass to ensure a lower VSWR for higher transmission efficiency.

Swan 16 Ounce 99 Percent Pack of 4 - Swan Isopropyl Alcohol 99 Percent #ad - First aid antiseptic Ships only within the 48 contiguous states. Prevents loosening from shock and vibration. No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone. Can be used on various sizes of fasteners - reduces inventory costs. Permanently locks studs and press fits. Medium strength thread locker for fasteners up to 3/4".

Cure speed 15 min. Sma male with a pin in center to SMA Female with A hole in center. Temp range -65 to 300 degrees F. Quick, neat and easy. Parts can be disassembled with hand tools. No mixing required. Qty: pack of 4.

#ad



Kimtech 34120 Kimwipes Delicate Task Wipers, 1-Ply, 4 2/5 x 8 2/5, 280 per Box Case of 30 Boxes

#ad
Kimberly-Clark Professional 34120 #ad - Use for repairing figurines, wiper blades, metal car parts, toys, cameras, costume jewelry, rubber seals and O-rings. Bonds leather, cardboard, cork, polycarbonate, wood, chipboard, fabric, paper, metal, ceramic, rubber and hard plastics such as Plexiglas, polystyrene and PVC. Sets in seconds and dries transparent.

Plus, the anti static dispensing design reduces electrostatic discharge. Impedance:50Ω, insertion loss≤015db/3ghz, vswR≤1. 1;teflon insulator ; Color: Gold. Decrease germs in minor cuts and scrapes. Protects threads from rust and corrosion. Prevents loosening from shock and vibration. No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone.

Kimtech 34120 Kimwipes Delicate Task Wipers, 1-Ply, 4 2/5 x 8 2/5, 280 per Box Case of 30 Boxes #ad - Can be used on various sizes of fasteners - reduces inventory costs. Permanently locks studs and press fits. Medium strength thread locker for fasteners up to 3/4". Fasteners coated with VC-3 can be easily adjusted, removed, and reused. With a legacy of more than 60 years of being the go to wipe for cleaning surfaces, and medical offices, parts, instruments in labs, laboratory lenses, these wipes easily clean liquids, dust and small particles.

#ad



KESTER SOLDER 32117 24-6040-0027 60/40 Stand, 0.031" Diameter,"44", 1.5"

#ad
KESTER SOLDER 32117 #ad - First aid antiseptic Ships only within the 48 contiguous states. Anti static dispensing system reduces lint and electrostatic discharge for sensitive environments like labs. 2 grams. Package content : 2 x SMA Female to Male Adapter. Parts can be separated using hand tools. Cure speed 15 min. Temp range -65 to 300 degrees F.

Works with metal, PE and PP plastic, wood, and more. Repairs any plastic guaranteed. Controlled lubricity for accurate clamp loads. Prevents loosening from shock and vibration. No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone. Can be used on various sizes of fasteners - reduces inventory costs.

KESTER SOLDER 32117 24-6040-0027 60/40 Stand, 0.031" Diameter,"44", 1.5" #ad - Permanently locks studs and press fits. Medium strength thread locker for fasteners up to 3/4". Kester ""44"" 60/40 solder rosin ""44"" is a high activity ra Core Flux Designed For Excellent Instant Wetting Action, Even On Nickel Surfaces. Fasteners coated with VC-3 can be easily adjusted, removed, and reused.

Cures reliably even on stainless steel. Per j-std-004, ""44"" is classified As Rom1 Flux.

#ad



Thermaltronics BC-10 Solder Tip Cleaning Wire

#ad
Thermaltronics BC-10 #ad - Sma male with a pin in center to SMA Female with A hole in center. Qty: pack of 4. No mixing required. For internal female or external male fastener threads. Quick, neat and easy. Full 24 hrs. Designed to bond rubber, metal and plastic parts with gaps to 0004". Fasteners coated with VC-3 can be easily adjusted, removed, and reused.

Thermaltronics BC-10 Solder Tip Cleaning Wire #ad - When mixed in equal volumes, rigid, the components react to produce a tough, high strength bond in 20 to 25 minutes. Loctite epoxy plastic bonder does not shrink and is resistant to water, most common solvents and shop fluids. It has high impact resistance and can be sanded and drilled. Recommended for bonding substrates such as PVC, FRP, polycarbonate, Mylar, acrylic, Nylon, Delrin, phenolic, ABS, aluminum and stainless steel.

Sma 90 degree angle adapter jack to Plug; Commercial Grade SMA Series Adapters. 2 grams. Useful for polishing glassware, cleaning laboratory instruments and other delicate surfaces. 12 grams each/ 10 per pack. Manufactured by Thermaltronics. 2-gram tube of bonder with 4mL activator.

#ad