Festool 492601 Guide Stop Adapter For OF 1400 And FS Guide Rails

Adapt the festool of 1400 router for use with the FS Guide Rail system for perfectly guided, straight routing. For attaching of 1400 EQ router to guide rail system. Features fine-adjustment controls, allowing you to precisely adjust the distance to cut in increments of 1/10mm. Made in Germany. Attaches quickly and easily using two rods included in the scope of delivery of the OF 1400 router.

. Includes support foot to level the router with the surface of the guide rail, ensuring smooth, accurate results and increased stability.

Festool 492636 Parallel Edge Guide With Fine Adjustment For OF 1400 Router

Constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service life. Attaches quickly and easily using integrated thumbscrews and two steel rods included in the router's scope of delivery. Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time.

Rout up against, or perfectly parallel to the material edge, ploughs, flutes, grooves, for precise dados, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the material edge in increments of 1/10mm for ultra-precise routing. Edge guide for use with the of 1400 EQ Router, allows you to run the router parallel to an edge.

.

Festool 574692 Router OF 1400 EQ Imperial

Precision depth adjustment: Micro-adjustability dial allows routing with tremendous precision. Rout up against, grooves, flutes, for precise dados, ploughs, or perfectly parallel to the material edge, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the material edge in increments of 1/10mm for ultra-precise routing.

. Ergonomic handles: festool routers are designed for increased control and reduced fatigue. Attaches and releases quickly with tool-free spring clip system. Attaches quickly and easily using integrated thumbscrews and two steel rods included in the router's scope of delivery. It’s got enough power for most routing tasks, yet it's small enough to allow precise control.

Integrated switches allow use with just one hand. Constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service life. Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time. Our most versatile router packs 1400 watts into less than 10 lbs.

Dust extraction: integrated dust extraction ports capture dust and debris at the point of creation, increasing visibility, prolonging cutter life, and saving valuable cleanup time. Swiveling chip deflector: can be used with edge forming bits, maximizing chip and dust extraction even around curves and corners.



Festool 491594 Quick Clamp For MFT And Guide Rail System, 6 5/8" 168mm

Precision depth adjustment: Micro-adjustability dial allows routing with tremendous precision. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool FS Guide Rails for limitless positioning. Constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service life.

Ergonomic handles: festool routers are designed for increased control and reduced fatigue. System integration: designed for use with the FS Guide Rail system, MFS multi-routing templates, and a wide range of other accessory options. Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time.

Ratcheting mechanism enables easy locking and quick release for a secure grip on your material. Works seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning. Includes 1 clamp. Attaches and releases quickly with tool-free spring clip system.

Dust extraction: integrated dust extraction ports capture dust and debris at the point of creation, prolonging cutter life, increasing visibility, and saving valuable cleanup time. Swiveling chip deflector: can be used with edge forming bits, maximizing chip and dust extraction even around curves and corners.

Includes 1 clamp.

Festool FS1400/2-LR32-55"1400 mmGuide Rail with holes For Drilling. Model-496939

The fs 1400/2-lr 32 guide rail 55-inch with the Festool Plunge cut saw to cut material up to 49-Inch. Rout up against, for precise dados, or perfectly parallel to the material edge, flutes, grooves, ploughs, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the material edge in increments of 1/10mm for ultra-precise routing.

Guide rails make work easier by taking the tool to the work, and save time and money by eliminating laborious measurements, rework and wasted material. Also, use the lr 32 system for line boring, or setting shelf pins in panels up to any length. Festool fs guide rails are available in eight different lengths from 32 -Inch to 197 -Inch 800 - 5000 mm, providing the right rail for every application.

Secures your workpiece for precision cutting, routing, sanding, sanding, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a a more efficient workflow. Works seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning.

Includes 1 clamp. Ergonomic handles: festool routers are designed for increased control and reduced fatigue. The fs fs 1400/2-lr 32 guide rail 55 -inch was designed specifically for use with Festool Routers and the LR 32 Hole Drilling System to construct cabinets using the European frameless 32mm system for shelf pins and hardware.



Festool 482107 Guide Rail Connector

Works seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning. Includes 1 clamp. Quickly and easily align and machine holes for shelf pins and 35 millimeter cup hinges. Integrated switches allow use with just one hand. Attaches and releases quickly with tool-free spring clip system.

Fits all guide rails. Clamping thickness 6 5/8 inches 168mm. Combine this guide rail with the Festool LR 32 Hole Drilling System to efficiently build European style 32mm cabinets. Precision depth adjustment: Micro-adjustability dial allows routing with tremendous precision. Connect a limitless number of guide rails for long cuts with Festool Guide Rail Connectors.

Rout up against, for precise dados, or perfectly parallel to the material edge, flutes, ploughs, grooves, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the material edge in increments of 1/10mm for ultra-precise routing. Constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service life.

Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time. The fs 1400/2-lr 32 guide rail 55-inch with the Festool Plunge cut saw to cut material up to 49-Inch. Set screws are slotted to prevent over-tightening the rail.

Festool 491498 55" Guide Rail FS 1400 1400mm

Combine this guide rail with the Festool LR 32 Hole Drilling System to efficiently build European style 32mm cabinets. Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action. The fs 1400/2-lr 32 guide rail 55-inch with the Festool Plunge cut saw to cut material up to 49-Inch.

Works seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning. Includes 1 clamp. Can also be used to connect Festool MFS templates. Clamping thickness 6 5/8 inches 168mm. Quickly and easily align and machine holes for shelf pins and 35 millimeter cup hinges.

Make your jobs easier by bringing the tool to the work. Secures your workpiece for precision cutting, sanding, sanding, routing, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a a more efficient workflow. A fully integrated system, plunge saws, use your Festool routers, or jigsaws with the guide rail for expanded capability.

Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action. Fits all guide rails. Use the fs 1400 guide rail 55 inches with the Festool TS Plunge cut saw to make precision cuts up to 49 inches long.

Festool 491582 FS Guide Rail Limit Stop, 1 Piece

Quickly and easily align and machine holes for shelf pins and 35 millimeter cup hinges. Integrated switches allow use with just one hand. Includes 1 Limit Stop. Integrated splinterguard serves as cut line and prevents tear-out and splintering. Provides a secure, positive stop for starting or ending a cut. Non-skid, dual-clamping rubber strips prevent movement during the cutting operation, saving significant set up time.

Clamping thickness 6 5/8 inches 168mm. Use the fs 1400 guide rail 55 inches with the Festool TS Plunge cut saw to make precision cuts up to 49 inches long. Steel bars with 4 set screws secure connectors, ensuring straight cuts. System integration: designed for use with the FS Guide Rail system, MFS multi-routing templates, and a wide range of other accessory options.

Secures your workpiece for precision cutting, sanding, sanding, routing, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a a more efficient workflow. Attaches and releases quickly with tool-free spring clip system. Works seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning.

Includes 1 clamp. Fits quickly and securely to the top of the FS Guide Rail for both cutting and routing applications.

Festool 492574 Small Bore Base

The fs 1400/2-lr 32 guide rail 55-inch with the Festool Plunge cut saw to cut material up to 49-Inch. Non-skid, dual-clamping rubber strips prevent movement during the cutting operation, saving significant set up time. Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time.

Constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service life. Made in Germany. Provides a secure, positive stop for starting or ending a cut. Attaches quickly and easily using integrated thumbscrews and two steel rods included in the router's scope of delivery.

Can also be used to connect Festool MFS templates. Fits quickly and securely to the top of the FS Guide Rail for both cutting and routing applications. Set screws are slotted to prevent over-tightening the rail. Integrated switches allow use with just one hand. Fits all guide rails. Clamping thickness 6 5/8 inches 168mm.

Attaches and releases quickly with tool-free spring clip system. Secures your workpiece for precision cutting, routing, sanding, sanding, or just about any other application.

Festool 493233 Table Widener

Fits all guide rails. Quickly and easily align and machine holes for shelf pins and 35 millimeter cup hinges. Combine this guide rail with the Festool LR 32 Hole Drilling System to efficiently build European style 32mm cabinets. Oversized, heavy-duty base plate with integrated dust hood. Made in Germany. Works seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning.

Includes 1 clamp. Steel bars with 4 set screws secure connectors, ensuring straight cuts. Use the fs 1400 guide rail 55 inches with the Festool TS Plunge cut saw to make precision cuts up to 49 inches long. Provides a secure, positive stop for starting or ending a cut. Precision depth adjustment: Micro-adjustability dial allows routing with tremendous precision.

Clamping thickness 6 5/8 inches 168mm. Fits quickly and securely to the top of the FS Guide Rail for both cutting and routing applications. Set screws are slotted to prevent over-tightening the rail. Ergonomic handles: festool routers are designed for increased control and reduced fatigue. Integrated splinterguard serves as cut line and prevents tear-out and splintering.



Festool 495020 Systainer Cart

Includes 1 Limit Stop. Precision depth adjustment: Micro-adjustability dial allows routing with tremendous precision. System integration: designed for use with the FS Guide Rail system, MFS multi-routing templates, and a wide range of other accessory options. Heavy-duty for loads up to 220 lbs. A fully integrated system, use your Festool routers or jigsaw with the guide rail for expanded capability.

Integrated switches allow use with just one hand. Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action. The fs 1400/2-lr 32 guide rail 55-inch with the Festool Plunge cut saw to cut material up to 49-Inch. Clamping thickness 6 5/8 inches 168mm. The most efficient workshops incorporate an array of wheeled, mobile solutions, so workstations can be customized according to task, then reconfigured at a moment's notice.

Enhance your own efficiency with a new low-profile, rugged SYS-Cart that allows you to create custom assortments of tools and accessories for job-specific tasks. Works seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning.

Includes 1 clamp. Locking latches grip your Sys-components securely, while a wide base eliminates concern over top-heavy stacks of equipment. Attaches quickly and easily using integrated thumbscrews and two steel rods included in the router's scope of delivery.