CE Smith Trailer Bunk Board Guide-On, 2′- Replacement Parts and Accessories for your Ski Boat, Fishing Boat or Sailboat Trailer

Ce smith trailer, 27660, 2' Bunk Board Guide-On. For larger trailer frames check out our Large Frame U-Bolt Kit 11416. Can be mounted on top of frame for extra height. 1-1/2" square pre-galvanized uprights, angled out at 75 Degree. Height of 21'' with adjustment out to 13" from frame on each side. Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized.

Complete with mounting hardware to fit frames up to 3'' wide x 4-1/4'' high. Because of the thinness of the coating less than 1 mm and the fact that the edges remain exposed, pre-galvanized parts can begin to oxidize and rust quickly, so its recommended that they be primed and painted. The edges of the pre-galvanized parts often lose their zinc coating during the stamping process.

2'' x 4'' x 24" boards tilt to hug the hull and are covered with high grade marine carpet; boards are untreated Southern yellow pine. Carpeted bunk boards provide proper center loading even in wind or side current conditions.


MaxxHaul 70214 Powder Coat Black Trailer Spare Tire Carrier

Mounts on trailer tongues up to 3 inch wide and 5 inch high. It holds 4-lug 4 on 4" bolt pattern and 5-lug 5 on 4-1/2" bolt pattern trailer wheels. Please note that it is not compatible with 5 on 4-3/4" or 5 on 5" bolt pattern. Angled and raised mount design makes this ideal for boat trailers as well. Zinc plated mounting hardware.

Our maxxhaul spare tire carrier quickly mounts to the tongue of your trailer to handle your trailer spare tire of up to 100 Pounds in weight. Durable powder coat finish to resist rust and corrosion. Holds 4-lug 4 on 4" bolt pattern and 5-lug 5 on 4-1/2" bolt pattern trailer wheels and not compatible with 5 on 4-3/4" or 5 on 5" bolt pattern.

.


CE Smith Trailer 32003G 3" Adjustable Keel Roller Bracket Assembly

Angled and raised mount design makes this ideal for boat trailers as well. It helps to absorb road shock while boat is being trailered. Adjustable keel roller bracket assemblies are perfect for adding keel support forward along the tongue. Durable powder coat finish to resist rust and corrosion. Keel roller supports your boat's keel as it sits on the trailer and makes it easier to load and unload your boat.

The spool roller helps to support your boat's keel during trailering. Zinc plated mounting hardware. Mounting hardware is included. 5 inch black rubber roller. Sturdy, corrosion-resistant brackets let you bolt roller Assembly onto the tongue of your boat trailer. Multiple holes in the brackets make it easy to Adapt to the different heights of trailer frames and also ensure that the roller will be mounted at the proper position.

Ce smith 32003g, pkg adjustable keel roller bracket Assembly - 3". Multiple mounting holes allow you to adjust the position and accommodate different trailer frame heights. These mounting brackets Sandwich around the trailer's tongue and attach with included 3/8" diameter bolts. Mounts on trailer tongues up to 3 inch wide and 5 inch high.

Fits 3 inch Tongue width.


CE Smith Trailer 10401G Galvanized Roller Bracket Assembly, 5"

Mounting slots are on 3 inch centers. Durable powder coat finish to resist rust and corrosion. Angled and raised mount design makes this ideal for boat trailers as well. They are once piece made of strong 11-gauge hot dip galvanized steel. Ce smith 10401g, 5", roller bracket Assembly, galvanized. Use with 5 inch roller Smith P/n 29515.

Mount using 1/2" or 7/16" fasteners not included. Includes pair of 3/8 inch bolts. Made in the USA. Mounts on trailer tongues up to 3 inch wide and 5 inch high. Panel brackets bolt to your trailer frame and typically brace a keel or spool roller to help with the transporting and loading of your boat. Zinc plated mounting hardware.

Fits 3 inch Tongue width. These assemblies some pre-assembled with a black rubber roller and roller shaft for easy installation. 5 inch black rubber roller. They have six gussets in the bends for added strength. Slots are 1/2" wide x 5" tall to provide plenty of adjustment to fit the hull. Panel bracket is Smith P/n 10301g40




CE Smith Trailer 10001G Swivel Bolster Bracket Assembled, 10"- Replacement Parts and Accessories for Your Ski Boat, Fishing Boat or Sailboat Trailer

Angled and raised mount design makes this ideal for boat trailers as well. Mount using 1/2" or 7/16" fasteners not included. 5/8" diameter x 6-1/4" roller shaft Smith P/n 10722a. Mounting slots are on 3 inch centers. 5 inch black rubber roller. Includes pair of 3/8 inch bolts. Zinc plated mounting hardware. This smith adjustable bracket is designed to support roller bunks.

Mounts on trailer tongues up to 3 inch wide and 5 inch high. Bolster bracket: 10" bracket, 11 gauge material, 2-1/2" wide, swivel hole 1/2" dia. Slots 1/2" wide, slots 3-3/4". Swivel bracket: 11 gauge material, bunk flange 1-3/8" x 3-1/2", bunk flange holes 3/8" dia. Swivel flange 2" tall x 3-1/2", swivel Flange hole 1/2" dia.

Hole centers 2-1/2". Overall assembly length is 11 inch. Holds 4-lug 4 on 4" bolt pattern and 5-lug 5 on 4-1/2" bolt pattern trailer wheels and not compatible with 5 on 4-3/4" or 5 on 5" bolt pattern. Ce smith 10001g swivel bolster bracket, 10 inch. This bracket assembly uses bolster bracket-10101g and swivel bracket-10200g.

Hot dip galvanizing for years of use in the harsh marine environment.


Extreme Max 3001.1068 Adjustable Heavy Duty Universal Transom Saver

The weight of your motor, potholes, high-speed trailering, bumps… simple physics says it's not good for your boat. Trailering puts a strain on your transom. 2-year replacement warranty. Perfect fit for all trailers. 5 inch black rubber roller. Bolster bracket: 10" bracket, 11 gauge material, 2-1/2" wide, swivel hole 1/2" dia.

Slots 1/2" wide, slots 3-3/4". Swivel bracket: 11 gauge material, bunk flange 1-3/8" x 3-1/2", bunk flange holes 3/8" dia. Swivel flange 2" tall x 3-1/2", swivel Flange hole 1/2" dia. Hole centers 2-1/2". Overall assembly length is 11 inch. We've done the math and calculated how to best support your transom and distribute your motor's weight.

It distributes the weight of your motor to the rest of your boat, eliminating strain on your transom and protecting your investment. Designed to perfectly fit all trailers. Easy removal. 5/8" diameter x 6-1/4" roller shaft Smith P/n 10722a. Includes pair of 3/8 inch bolts. Use with 5 inch roller Smith P/n 29515.




CE Smith Trailer 11416 2 Straight & 2 Formed Square U-bolt, 3/8" x 3-1/2" x 6- Replacement Parts and Accessories for your Ski Boat, Fishing Boat or Sailboat Trailer

4 u-bolts per kit 2 formed & 2 straight. Designed for optimal weight distribution. Bolster bracket: 10" bracket, 11 gauge material, 2-1/2" wide, swivel hole 1/2" dia. Slots 1/2" wide, slots 3-3/4". Swivel bracket: 11 gauge material, bunk flange 1-3/8" x 3-1/2", bunk flange holes 3/8" dia. Swivel flange 2" tall x 3-1/2", swivel Flange hole 1/2" dia.

Hole centers 2-1/2". Overall assembly length is 11 inch. Zinc plated mounting hardware. Mount using 1/2" or 7/16" fasteners not included. 2-year replacement warranty. For use with our U-bolt mounted guide-ons. 5' bunk board style guide-ons Champions/N 27600require 2 kits, all other guide-ons require 1 kit. Panel bracket is Smith P/n 10301g40

Mounting slots are on 3 inch centers. Angled and raised mount design makes this ideal for boat trailers as well. Designed to perfectly fit all trailers. U-bolts for mounting to frames up to 3" wide x 5-1/4" high. Includes pair of 3/8 inch bolts.


attwood Pole Light Storage Clip,

Zinc plated. Easy installation and removal. Includes pair of 3/8 inch bolts. Bolster bracket: 10" bracket, 11 gauge material, 2-1/2" wide, swivel hole 1/2" dia. Slots 1/2" wide, slots 3-3/4". Swivel bracket: 11 gauge material, bunk flange 1-3/8" x 3-1/2", bunk flange holes 3/8" dia. Swivel flange 2" tall x 3-1/2", swivel Flange hole 1/2" dia.

Hole centers 2-1/2". Overall assembly length is 11 inch. 2-year replacement warranty. Fits 3 inch Tongue width. 5/8" diameter x 6-1/4" roller shaft Smith P/n 10722a. Fully adjustable 28" - 59" transom saver. 5 inch black rubber roller. Furnished with nickel plates brass finishing washer. Holds 4-lug 4 on 4" bolt pattern and 5-lug 5 on 4-1/2" bolt pattern trailer wheels and not compatible with 5 on 4-3/4" or 5 on 5" bolt pattern.

3/4 inches- diameter poles. Angled and raised mount design makes this ideal for boat trailers as well. Designed for optimal weight distribution. Color - black. Rubber clip.


CE Smith Trailer Roller Guide-On- Replacement Parts and Accessories for your Ski Boat, Fishing Boat or Sailboat Trailer

1-1/2" pre-galvanized steel uprights lean outward 15 Degree to cradle the boat. Mounting hardware included for frames up to 3" W x 4-1/4"H. Sold in pairs. 5/8" diameter x 6-1/4" roller shaft Smith P/n 10722a. Holds 4-lug 4 on 4" bolt pattern and 5-lug 5 on 4-1/2" bolt pattern trailer wheels and not compatible with 5 on 4-3/4" or 5 on 5" bolt pattern.

Mounting slots are on 3 inch centers. Fully adjustable 28" - 59" transom saver. 2-year replacement warranty. 3/8"-16 x 6" long x 3. 5" wide with a thread length of 2". Durable powder coat finish to resist rust and corrosion. Ideal for retrieving your boat on shallow ramps where the trailer is not far into the water, when you are alone, or have a crosswind or current pushing the boat.

Uprights with rollers come fully assembled, ready for installation. For larger trailer frames check out our Large Frame U-Bolt Kit 11416. Designed for optimal weight distribution. Angled and raised mount design makes this ideal for boat trailers as well. Use with 5 inch roller Smith P/n 29515. Designed to perfectly fit all trailers.




CE Smith Trailer Bunk Board Guide-On, 5'- Replacement Parts and Accessories for Your Ski Boat, Fishing Boat or Sailboat Trailer

Complete with mounting hardware to fit frames up to 3'' wide x 4-1/4'' high. The bunk boards then tilt to conform to the boat's hull. Because of the thinness of the coating less than 1 mil and the fact that the edges remain exposed, pre-galvanized parts can begin to oxidize and rust quickly, so its recommended that they be primed and painted.

For larger trailer frames check out our Large Frame U-Bolt Kit 11416. Holds anti-glare pole lights. Mounts on trailer tongues up to 3 inch wide and 5 inch high. Rubber clip. Designed for optimal weight distribution. 2-year replacement warranty. Zinc plated. Includes pair of 3/8 inch bolts. 4 u-bolts per kit 2 formed & 2 straight.

The edges of the pre-galvanized parts often lose their zinc coating during the stamping process. 5/8" diameter x 6-1/4" roller shaft Smith P/n 10722a. Easy installation and removal. Can be mounted on top of frame for extra height . Guide-ons are 21" tall above the frame with 9" roller & 2" roller caps at top & bottom .




CE Smith Trailer Post Guide-On with Unlighted Posts, 40"- Replacement Parts and Accessories for Your Ski Boat, Fishing Boat or Sailboat Trailer

Can be mounted on top of frame for extra height . Holds anti-glare pole lights. Easy installation and removal. Panel bracket is Smith P/n 10301g40 Mounts on trailer tongues up to 3 inch wide and 5 inch high. Complete with mounting hardware to fit frames up to 3'' wide x 4-1/4'' high. Zinc plated mounting hardware.

Bolster bracket: 10" bracket, 11 gauge material, 2-1/2" wide, swivel hole 1/2" dia. Slots 1/2" wide, slots 3-3/4". Swivel bracket: 11 gauge material, bunk flange 1-3/8" x 3-1/2", bunk flange holes 3/8" dia. Swivel flange 2" tall x 3-1/2", swivel Flange hole 1/2" dia. Hole centers 2-1/2". Overall assembly length is 11 inch.

Mounting brackets allow up to 13" of adjustment out from each side of the frame. 2'' x 4'' x 60" boards tilt to hug the hull and are covered with high grade marine carpet; Boards are untreated Southern Yellow Pine. Angled and raised mount design makes this ideal for boat trailers as well. Ce smith trailer, 27620, 40" Post Guide-On with Unlighted Posts.

Furnished with nickel plates brass finishing washer. Zinc plated.