Carbon heater tape 17 ft length x 0.59 in width

It's a resistive carbon heating tape. 19±1 ohm/m. But you can cut it into smaller length only. 1, 5k. Diy carbon heater tape for vest, jacket, insoles, gloves.5±1g/m. You can make your own inexpensive heated gloves, sleeping bag, vest, heated pad, jacket, heated insoles, socks. Idial for DIY heating clothes. Width: 0

59 in 5 meters x 15±2mm x 0, 6±0, 1 mm. You can cut it by the length to increase the power. It cannot be cut into smaller widths. You must have an experiance in electronic DIY projects to prevent any hazardous of using it. Length: 17 ft. The power consumption of 1 meter is about: 07w/m 3. 7v, 2. 9w/m 7. 4v, 7. 5w/m 12V.

.

Uxcell a11032500ux0133 KSD9700 NC 45C Bimetal Thermostat Temperature Switch Pack of 2

Type: ncnormal close; contact capacity: 250V 5A; max rated disconnection temperature: 45C/113F. Active temperature: 45 5 °c; reset temperature: >=30 °c; color: black, silver tone. The bimetal disc is in free state and the contacts are closed when the electrical appliance is working in normal condition. When the ambient temperature raises to the preset operating temperature, the contacts open as the Bimetal disc deforms to jump when being heated, then the circuit is cut off to control the temperature.

Then the contacts will close automatically to cut on the circuit when the electrical appliance is cooled down to the reset temperature. Widely used in home appliance and rsquo; use motor and electrical equipment, such as air Conditioner motor, thermal appliances, transformer, etc. Product name: temperature control switch; material: plastic, bimetal; model: Ksd9700

Ul>ksd9700 product is a kind of thermostat which adopt the Bimetal disc as the temperature sensing element.

Low Cost, 1 Part Heat Dry Electrically Conductive, Silver Epoxy Adhesive AA-DUCT AD1 , 2.5gm Syringe

Refer to mSDS for more details. Mechanical properties hardness, shore D 83, Pot Life 6 months At 25 °C 9 months refrigerated. Dangerous if swallowed. Availability: This epoxy can be supplied in various different packages. Sheet resistivity 10-12 m?/sq, Lap shear strength 2000 Lb/in2. Mixed viscosity 6800 cp, density gm/cc 2.

35, silver percentage 65-75. Active temperature: 45 5 °c; reset temperature: >=30 °c; color: black, silver tone. Avoid prolonged contact with skin, if contact with skin occurs, wash area immediately with a soap and water avoid prolonged breathing of vapor. Uncured properties: viscosity At 25 °C cps 6, 800 Density gm/cc 2.

35 silver, % 65-75 Density gm/cc 2. 35 pot life 6 months at 25 °c 9 months At refrigerated CURE SCHEDULE 07 hours at 175 °C 1. 5 hours at 150 °c 2 hours at 120 °c misc properties: hardness, shore d 83 sheet resistivity 10-12 m?/sq Lap shear strength 2000 Lb/in2 GENERAL INFORMATION: This product contains organic solvent.

Aa-duct ad1 shows slight settling when stored for a long period of time, no caking and will re disperse to a smooth homogeneous state. General properties: appearance silver cure type heat cure benefits high strength Perfect bond EMI & RFI shielding Wave guides Substrates Excellent choice aluminum, copper, ceramic, glass, magnesium, kovar, nickel, bronze, steel, phenolic and G-10 epoxy glass boards.

Cure time 0

5 pieces 0.3ML Silver Conductive Wire Glue Paste For Electronics Repair Applications

Volume： 03 ml. Mixed viscosity 6800 cp, density gm/cc 2. 35, silver percentage 65-75. This silver conductive glue paste are widely used in home supplies, For example drinking machine, refrigerator, electromagnetic oven and electronic kettles etc. Great for both rigid & flexible substrates. Type: ncnormal close; contact capacity: 250V 5A; max rated disconnection temperature: 45C/113F.

. Appearance Silver, Cure Type Heat cure. Cure time 07 hours at 200 °c, 1. 5 hours at 180 °C, 2. 5 hours at 160 °C. Active temperature: 45 5 °c; reset temperature: >=30 °c; color: black, silver tone. Cpu in computer, led display, controller, optical fiber communication equipment, LCD display, heat sink and LED etc.

Product name: temperature control switch; material: plastic, bimetal; model: Ksd9700 It is very Easy using. Just plug and play. And it is perfect for repairing defect traces / tracks or creating smooth jumpers on PCB board. Or used for repairing membrane switches. 100% new.

Carbon heater rope 17 ft length x 0.12 in width

You can make your own inexpensive heated gloves, heated pad, jacket, heated insoles, vest, sleeping bag, socks. You must have an experiance in electronic DIY projects to prevent any hazardous of using it. Width: 012 in 5m x 3mm 1, 5K. Volume： 03 ml. But you can cut it into smaller length only. Usage:1. Cure time 0

7 hours at 200 °c, 1. 5 hours at 180 °C, 2. 5 hours at 160 °C. 100% new. Mixed viscosity 6800 cp, density gm/cc 2. 35, silver percentage 65-75. Apply the silver paste in where you want, 2. After the desired tracks get covered, 3. Using a hair dryer, please allow one hour for drying, if you want it drying rapidly for 5 - 10 minutes.

Package content:5 pieces 03ml silver conductive paste. Length: 17 ft. Product name: temperature control switch; material: plastic, bimetal; model: Ksd9700 It cannot be cut into smaller widths.

Carbon heater rope 33 ft length x 0.12 in width

Type: ncnormal close; contact capacity: 250V 5A; max rated disconnection temperature: 45C/113F. Active temperature: 45 5 °c; reset temperature: >=30 °c; color: black, silver tone. Length: 33ft. But you can cut it into smaller length only. Diy carbon heater tape for vest, insoles, jacket, gloves. Diy carbon heater tape for vest, jacket, insoles, gloves.

100% new. 21±2 ohm/m 6. 4±05 ohm/ft, 3±05 g/m 09±015 g/ft idial for DIY heating clothes. Mechanical properties hardness, shore D 83, Pot Life 6 months At 25 °C 9 months refrigerated. Usage:1. Mixed viscosity 6800 cp, density gm/cc 2. 35, silver percentage 65-75. Sheet resistivity 10-12 m?/sq, Lap shear strength 2000 Lb/in2.

Volume： 03 ml. It cannot be cut into smaller widths. Appearance Silver, Cure Type Heat cure.