1″ X 8″ Post for Module Tool Rest System

#ad
Teknatool International 9031 #ad - Interchangeable tool rests available. Solid Steel for long life. Requires one of the nova tool rest bars additional purchase This threaded post enables you to unfasten different NOVA Tool rest bars and attach as needed. Supports to create the perfect tool rest for your needs. This is part of the modular nova tool Rest System, a flexible system which allows you to mix and match your Tool rest Posts.

Economical modular system. Nova 9031 1 inch by 8 inch machined Steel Tool Rest Post fits most Wood lathe Tool slides. Call our customer service center toll free on 1-866-748-3025. Backed by a full replacement 2-year warranty from Teknatool International. The 1 inch/25. 4mm shaft with 8 inch/203mm length, can fit to most Wood Lathe Tool side shafts, including all NOVA lathes excluding Mini Lathes.

1" X 8" Post for Module Tool Rest System #ad - Check with your lathe manual or lathe supplier for details of your lathe if unsure.

#ad



NOVA 9091 Small Bowl Rest, 5.2" Diameter

#ad
Nova 9091 #ad - The rest is radius on the top and bottom edges for smooth movement of the chisels and it can be used in either orientation for versatility. Nova small bowl rest, 5. 2" diameter. Radius edges to allow the chisel to glide smoothly along the rest. Part of the nova modular tool rest system, the 9091 small bowl rest with 5.

2" diameter curve is for turning the interior of smaller bowls. Can be used in either orientation by simply turning it over and attaching it to the post.

#ad



NOVA 9092 Large Bowl Rest with 8.5" diameter

#ad
Nova 9092 #ad - Part of the nova modular tool rest system, the 9091 small bowl rest with 5. 2" diameter curve is for turning the interior of smaller bowls. Radius edges to allow the chisel to glide smoothly along the rest. Nova large bowl rest, 8. 5" diameter the rest is radius on the top and bottom edges for smooth movement of the chisels and it can be used in either orientation for greater versatility.

Can be used in either orientation by simply turning it over and attaching it to the post. Part of the nova modular tool rest system, the 9090 bowl rest with 8. 5" diameter curve is for turning the interior of bowls. Radius edges to allow the chisel to glide smoothly along the rest. Part of nova's modular tool rest system which offers 5/8" and 1" posts in various lengths.

#ad



NOVA 9090 Large Bowl Rest, 8.5" Diameter Curve

#ad
Nova 9090 #ad - The rest is radius on the top and bottom edges for smooth movement of the chisels and it can be used in either orientation for greater versatility. Can be used in either orientation by simply turning it over and attaching it to the post. Part of the nova modular tool rest system, the 9090 bowl rest with 8.

5" diameter curve is for turning the interior of bowls. Radius edges to allow the chisel to glide smoothly along the rest. Part of nova's modular tool rest system which offers 5/8" and 1" posts in various lengths. Can be used in either orientation by simply turning it over and attaching it to the post. Solid steel construction insures dependable, long term service.

NOVA 9090 Large Bowl Rest, 8.5" Diameter Curve #ad - Radius edges to allow the chisel to glide smoothly along the rest. Part of the nova modular tool rest system, the 9090 bowl rest with 8. 5" diameter curve is for turning the interior of bowls. Part of nova's modular tool rest system which offers 5/8" and 1" posts in various lengths. Part of the nova modular tool rest system, the 9091 small bowl rest with 5.

2" diameter curve is for turning the interior of smaller bowls. Radius edges to allow the chisel to glide smoothly along the rest.

#ad



NOVA 9026 4"/101mm Tool Rest Bar

#ad
Teknatool International 9026 #ad - Radius edges to allow the chisel to glide smoothly along the rest. Part of nova's modular tool rest system which offers 5/8" and 1" posts in various lengths. Part of nova's modular tool rest system which offers 5/8" and 1" posts in various lengths. Can be used in either orientation by simply turning it over and attaching it to the post.

Solid steel construction insures dependable, long term service. Economical modular system. This threaded bar enables you to use different NOVA Tools rest Posts as needed. Radius edges to allow the chisel to glide smoothly along the rest. Interchangeable tool posts. Call our customer service center toll free on 1-866-748-3025.

NOVA 9026 4"/101mm Tool Rest Bar #ad - Can be used in either orientation by simply turning it over and attaching it to the post. Part of the nova modular tool rest system, the 9090 bowl rest with 8. 5" diameter curve is for turning the interior of bowls. Cast steel bodies with stainless steel wear rods on top edge. The 4 inch/101mm length, is perfect for most Mini Lathes or when you want more precise tool control for smaller work on your larger lathe.

Made from cast steel with a stainless steel top rod for durability and smooth operation.

#ad



NOVA 9027 Tool Rest Bar 6" / 150mm

#ad
Teknatool International 9027 #ad - Interchangeable tool posts. Call our customer service center toll free on 1-866-748-3025. Cast steel bodies with stainless steel wear rods on top edge. Part of nova's modular tool rest system which offers 5/8" and 1" posts in various lengths. Can be used in either orientation by simply turning it over and attaching it to the post.

Solid steel construction insures dependable, long term service. Economical modular system. Nova 9027 6 inch tool rest bar is part of the module nova tool rest System, a flexible system which allows you to mix and match your Tool rest Posts and Supports to create the perfect Tool rest for your needs. The 6 inch/152mm length, is perfect for most Mini Lathes or when you want more precise tool control for smaller work on your larger lathe.

NOVA 9027 Tool Rest Bar 6" / 150mm #ad - Radius edges to allow the chisel to glide smoothly along the rest. This threaded bar enables you to use different NOVA Tools rest Posts as needed. Economical modular system. Requires one of NOVA Tools Rest Posts additional purchase. Radius edges to allow the chisel to glide smoothly along the rest. Radius edges to allow the chisel to glide smoothly along the rest.

Can be used in either orientation by simply turning it over and attaching it to the post.

#ad



NOVA Large Box Rest 9094

#ad
Nova 9094 #ad - Radius edges to allow the chisel to glide smoothly along the rest. Can be used in either orientation by simply turning it over and attaching it to the post. Part of the nova modular tool rest system, the 9090 bowl rest with 8. 5" diameter curve is for turning the interior of bowls. Economical modular system. Cast steel bodies with stainless steel wear rods on top edge.

Part of the nova modular tool rest system, the 9091 small bowl rest with 5. 2" diameter curve is for turning the interior of smaller bowls. Part of nova's modular tool rest system which offers 5/8" and 1" posts in various lengths. Can be used in either orientation by simply turning it over and attaching it to the post.

NOVA Large Box Rest 9094 #ad - Solid steel construction insures dependable, long term service. Economical modular system. Requires one of NOVA modular tool rests additional purchase. For working bowls and other turnings with a scraper. The flat surface provides superior control of the scraper. 1-1/2″ wide x 4-1/2″ long.

#ad



NOVA 9025 Tool Rest Post 1" x 5"

#ad
Teknatool International 9025 #ad - Cast steel bodies with stainless steel wear rods on top edge. Call our customer service center toll free on 1-866-748-3025. Part of nova's modular tool rest system which offers 5/8" and 1" posts in various lengths. Interchangeable tool posts. Requires one of the nova tool rest bars additional purchase This threaded post enables you to unfasten different NOVA Tool rest bars and attach as needed.

The 1 inch/25. 4mm shaft with 5 inch/127mm length, can fit to most Wood Lathe Tool side shafts, including all NOVA lathes excluding Mini Lathes. Can be used in either orientation by simply turning it over and attaching it to the post. Part of the nova modular tool rest system, the 9090 bowl rest with 8. 5" diameter curve is for turning the interior of bowls.

NOVA 9025 Tool Rest Post 1" x 5" #ad - Backed by a full replacement 2-year warranty from Tekna tool International, since 1955. Check with your lathe manual or lathe supplier for details of your lathe if unsure. Cast steel bodies with stainless steel wear rods on top edge. Economical modular system. Solid Steel for long life. Part of the nova modular tool rest system, the 9091 small bowl rest with 5.

#ad



NOVA 9028 Tool Rest Bar 12" / 304mm

#ad
Teknatool International 9028 #ad - Can be used in either orientation by simply turning it over and attaching it to the post. Part of the nova modular tool rest system, the 9090 bowl rest with 8. 5" diameter curve is for turning the interior of bowls. Interchangeable tool rests available. Economical modular system. Call our customer service center toll free on 1-866-748-3025.

Part of nova's modular tool rest system which offers 5/8" and 1" posts in various lengths. Can be used in either orientation by simply turning it over and attaching it to the post. Solid steel construction insures dependable, long term service. Economical modular system. Cast steel bodies with stainless steel wear rods on top edge.

NOVA 9028 Tool Rest Bar 12" / 304mm #ad - Backed by a full replacement 2-year warranty from Tekna tool International, since 1955. The 12 inch/304mm length, is perfect for most Mini Lathes or when you want more precise tool control for smaller work on your larger lathe. This threaded bar enables you to use different NOVA Tools rest Posts as needed.

Requires one of NOVA modular tool rests additional purchase. For working bowls and other turnings with a scraper. The flat surface provides superior control of the scraper.

#ad



CA Adhesive, Thin 4.5 oz.

#ad
Stick Fast #ad - Solid Steel for long life. Interchangeable tool posts. Interchangeable tool posts. Economical modular system. Radius edges to allow the chisel to glide smoothly along the rest. Interchangeable tool rests available. Part of nova's modular tool rest system which offers 5/8" and 1" posts in various lengths. Can be used in either orientation by simply turning it over and attaching it to the post.

Solid steel construction insures dependable, long term service. Economical modular system. Aerosol activator spray application is more atomized and reduces potential foaming problems. Quick-set Glue Activator 7 oz. Part of nova's modular tool rest system which offers 5/8" and 1" posts in various lengths. Ca-medium is a great general-purpose adhesive that penetrates porous wood to harden and seal surfaces.

CA Adhesive, Thin 4.5 oz. #ad - Economical modular system. Cast steel bodies with stainless steel wear rods on top edge. Economical modular system. Ca-flexible has extremely good bond strength that retains a flexible condition when cured, making it ideal for pen making or wood to metal applications. Requires one of NOVA modular tool rests additional purchase.

#ad



NOVA 71061 Toolrest bar 150mm/6" Length

#ad
Teknatool 71061 #ad - Part of nova's modular tool rest system which offers 5/8" and 1" posts in various lengths. Can be used in either orientation by simply turning it over and attaching it to the post. Solid steel construction insures dependable, long term service. Economical modular system. Made from cast steel with a stainless steel top rod for durability and smooth operation.

Economical modular system. This threaded bar enables you to use different NOVA tools rest Posts as needed. Part of nova's modular tool rest system which offers 5/8" and 1" posts in various lengths. Requires one of NOVA tools rest Posts additional purchase. Interchangeable tool rests available. Interchangeable tool posts.

NOVA 71061 Toolrest bar 150mm/6" Length #ad - Interchangeable tool posts. Radius edges to allow the chisel to glide smoothly along the rest. Part of the nova modular tool rest system, the 9091 small bowl rest with 5. 2" diameter curve is for turning the interior of smaller bowls. Interchangeable tool posts. Economical modular system.

#ad